Brakes/Levers/Pads

• All weather compound • Cantilever post style • Black • 52mm

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed, and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment - Qwik-Adjust Barrel Adjuster - Bend Zone - All weights per pair - All levers are compatible with mechanical disc brakes and linear-pull brakes

• All weather compound • Fits most 50mm road caliper brakes • Available in Clear or Black models

- Available in both short- and long-pull versions - Forged AL6061 alloy construction - 3-finger lever design with laser-etched grip pattern - Return spring with reach and cable adjustment - 22.2mm (7/8") knee-friendly clamp - 195g pair

- Adjustable cable pull for linear, mechanical disc, caliper, or cantilever brakes - Forged AL6061 alloy construction - 2-finger lever design - Return spring with reach and cable adjustment - 22.2mm (7/8") knee-friendly clamp - 200g pair

6-Bolt mounting pattern - Wide leg design improves rotor`s lateral stiffness for a consistent and firm braking surface - Stainless steel construction - Torx bolts included

- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Material: Steel - Compound: Semi-Metallic - Compatibility: Shimano M900,M9020,M988,M985,M8000,M785,M675,M666,M615,R785,RS785,R515,R315,S700,CX75 FSA K-Force/Afterburner

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Jagwire's Road Pro Inserts are a nice upgrade for Shimano and SRAM sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Zipp Center Lock Lockring for 140mm to 160mm

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

- High Performance Brake Pads - Disc Pad Material: Organic

- Forged aluminum arms - 102mm arm length - 158g

- Top mount levers for use with caliper or cantilever brakes - Forged aluminum - Hinge clamp style - Return spring and reach adjustment - Black - 90g / pair

Bred from the racetrack, the newly formulated Performance Resin Pads are our highest performing pads to date. - New Performance Resin Compound - Fits all TRP 2-Piston Calipers - Increased Heat Stability - Shorter Bed-In Process - Provides a lighter lever feel - Increases power transfer with a snappy initial bite - Sold Per Wheel

Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.

TRP Alloy Rim brake pads are specifically designed for aluminum rim braking surfaces. - High performance brake pads - Aluminum rim compound - Fits all TRP road brakes, InPlace cartridges, Shimano and Shimano compatible road cartridges - Color: Black - Sold in sets of 4 (2 pairs)

- Replacement hydraulic tubing with fittings

Lock rings for all TRP Centerlock Rotors

- Ergonomic lever blade - Advanced 9mm internal brake lever piston - 5mm hydraulic brake hose - High performance hydraulic brake fluid - Hybrid pistons - High performance resin pad compound - New high flow caliper - 2.3mm thick rotors - CNC machined and marked adapters - Compatible with 223/220/203/180/160/140mm rotors (sold separately) - Weight: 310g (Front without rotor and adapter)

TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers

Full sintered metallic replacement pads for flat mount Hylex RS brakes. - Full metallic compound for maximum performance and power - Fits Hylex RS brakes - Color: TRP Copper - Sold per wheel

With the evolution of disc brakes on time trial bikes, TRP saw the need for a high-performance hydraulic TT disc brake resulting in the all-new HD-T910. We took a unique approach to the time trial brake by combining speed and style which resulted in the TT Hydro. Initially, the lever was handcrafted from clay before being finished off in aluminum. This allowed our designers to offer maximum ergonomics and an elegant visual appearance. From there it was forged from alloy, given a replaceable rubberized grip, and finished off with a carbon lever blade. The lever is matched to a black flat mount caliper designed to offer controlled braking at any speed. The levers come in two widths for differing bar diameters: - For bars measuring a diameter between 22-24 mm: HD-T910 - For bars measuring a diameter between 24-25 mm: HD-T912 - HD-T910 (OD 22-24 mm) - HD-T912 (OD 24-25 mm) - Carbon Fiber Lever Blade - Forged Alloy Lever Body - TRP 2-Piston Flat Mount Caliper - Integrated and Replaceable Grip - Anodized Black - 5.0 mm High Quality Hose with 1900 mm length - Factory Pre-Bled with EZ-Plug System - Blip or Di2 Shifter Adapter Inserts Available - Top Loading Pad Design - 390g (front) - Minimum bar insertion is 55mm

TRP HY/RD disc brake calipers have the power and modulation of hydraulic disc brakes. True ‘plug-and-play’ compatibility with existing cable actuated systems. - Self-contained hydraulic caliper incorporates master cylinder - Hydraulic system self-adjusts for pad wear - Compatible with all mechanical road and CX brake levers - Brake pad composite is Resin with Metal Fibers - Resin with Metal Fibers pads are compatible with Resin-Only type rotors as well as standard rotors